Shipping lithium batteries internationally by air means classifying them as Class 9 dangerous goods under the IATA Dangerous Goods Regulations, packing them to the right packing instruction (PI 965 to 970), limiting the state of charge where required, and marking, labeling and documenting every package before the airline accepts it.
The rules are strict because lithium cells can go into thermal runaway, and IATA's 2026 changes aim to reduce that risk in air transport. Airlines reject packages that are misclassified, overcharged or missing a mark, and a rejected battery shipment sits in Miami while the order waits at destination. If you ship batteries regularly, our international air freight service books dangerous goods with carriers that accept them on your lane. This guide covers the air rules only; ocean shipments follow the IMDG Code, covered in our article on dangerous goods by ocean freight.
Every lithium battery shipment starts with three questions: is the chemistry lithium ion or lithium metal, is the battery shipped alone, packed with equipment or contained in equipment, and how large is it? The answers give you the UN number, the packing instruction and the section that applies.
The IATA Lithium Battery Guidance Document, revised for the 2026 regulations and based on the 67th Edition (2026) of the DGR, sets out the classification:
| Battery configuration | Lithium ion | Lithium metal |
|---|---|---|
| Shipped by itself | UN 3480, PI 965 | UN 3090, PI 968 |
| Packed with equipment | UN 3481, PI 966 | UN 3091, PI 969 |
| Contained in equipment | UN 3481, PI 967 | UN 3091, PI 970 |
The UN number is the four-digit identifier that follows the package from the shipper's declaration to the aircraft load sheet; our glossary entry on the UN number explains how the system works across all dangerous goods.
Size decides the section within each packing instruction. A lithium ion cell up to 20 Wh or a battery up to 100 Wh can qualify for the lighter Section IB or Section II provisions; above those thresholds the battery is fully regulated under Section IA or Section I. For lithium metal, the thresholds are 1 g of lithium per cell and 2 g per battery.
The packing instruction sets the quantity per package, the packaging standard and whether a passenger aircraft can carry it. These are the per-package limits in the IATA guidance for lithium ion batteries:
| PI and section | Size | Passenger aircraft | Cargo aircraft only |
|---|---|---|---|
| PI 965 Section IA (UN 3480) | Cells > 20 Wh, batteries > 100 Wh | Forbidden | 35 kg |
| PI 965 Section IB (UN 3480) | Cells ≤ 20 Wh, batteries ≤ 100 Wh | Forbidden | 10 kg |
| PI 966 Section I (UN 3481) | Cells > 20 Wh, batteries > 100 Wh | 5 kg | 35 kg |
| PI 966 Section II (UN 3481) | Cells ≤ 20 Wh, batteries ≤ 100 Wh | 5 kg | 5 kg |
| PI 967 Section I (UN 3481) | Cells > 20 Wh, batteries > 100 Wh | 5 kg | 35 kg |
| PI 967 Section II (UN 3481) | Cells ≤ 20 Wh, batteries ≤ 100 Wh | 5 kg | 5 kg |
On packaging, the guidance summary calls for UN specification packaging under PI 965 Section IA and PI 966 Section I, and for packaging that passes a 1.2 m drop test and a 3 m stack test under PI 965 Section IB. For the other sections, the packaging text of each packing instruction in the DGR applies.
Lithium metal follows the same structure in PI 968, 969 and 970, with a 2.5 kg cargo aircraft limit for PI 968 Section IB. Since January 2025, IATA also requires packaging that is not UN specification for batteries packed with or contained in equipment under several Section II and Section I provisions to meet an additional 3 m stack test requirement, according to IATA's lithium battery program page.
Lithium ion cells and batteries shipped by themselves (UN 3480, PI 965) must travel at a state of charge (SoC) of 30% or less of their rated capacity. A battery above 30% can only fly with the approval of the State of Origin and the State of the Operator under Special Provision A331.
From 1 January 2026, the limit extends to batteries packed with equipment:
The rationale is in the guidance itself: a cell at a lower state of charge is less prone to thermal runaway. For the shipper, the practical consequence is that SoC must be set at the factory or the warehouse and stated in the paperwork, because nobody at the airline can measure it on a sealed pallet.
Lithium ion batteries shipped by themselves (UN 3480) and lithium metal batteries shipped by themselves (UN 3090) are forbidden as cargo on passenger aircraft. Every package prepared under PI 965 or PI 968 Section IA and IB must carry a Cargo Aircraft Only label in addition to the other marks and labels.
That rule shapes routing more than any other. A lane served only by passenger aircraft belly space cannot carry standalone batteries at all, however small the shipment. Batteries packed with or inside equipment (UN 3481 and UN 3091) can fly on passenger aircraft within the 5 kg per-package limit.
The same packages also have segregation rules: UN 3480, UN 3090 and UN 3551 batteries must not share an outer packaging or overpack with Class 1 explosives (other than Division 1.4S), Division 2.1 flammable gases, Class 3 flammable liquids, Division 4.1 flammable solids or Division 5.1 oxidizers.
A compliant lithium battery shipment carries four kinds of evidence.
US shippers also answer to the Hazardous Materials Regulations: 49 CFR 173.185 governs lithium cells and batteries shipped from the United States, and an air shipment must satisfy both rule sets.
Anyone who classifies, packs, marks or signs the DGD must be trained for dangerous goods by air. A forwarder can check the paperwork; the legal responsibility for the declaration stays with the shipper who signs it.
Lithium batteries move south from Miami inside phones, laptops, power tools, solar storage, e-bikes and medical devices. Three regional factors change how those shipments are planned.
Freighter capacity decides UN 3480. Where a destination is served only by passenger aircraft, standalone lithium ion batteries cannot ride in those bellies, so a solar installer in a small island market ships battery banks by ocean or on a freighter routing, not on the next passenger flight. Batteries inside equipment have far more options.
State approvals involve more than one country. Shipping above 30% SoC requires approval from the State of Origin and the State of the Operator, and the IATA guidance notes that certain States also require approval when they are the State of Destination. An approval obtained in the US does not oblige any airline to carry the shipment.
Returns cannot always fly back. Batteries damaged or identified by the manufacturer as defective for safety reasons, including those inside recalled phones or laptops, are forbidden by air under Special Provision A154. Devices returned to Miami for other faults, such as a broken screen, can still fly under the normal rules.
Batteries waiting for a flight, or consolidated with other hazmat for export, need a facility licensed for the class; our hazmat warehouse in Miami stores and prepares dangerous goods before tender. For departures out of South Florida, see our air freight service from Miami.
Most refused battery shipments fail on paperwork and marking, not on the batteries themselves. These are the issues an acceptance check in Miami catches before the freight reaches the aircraft:
| Rejection reason | How to prevent it |
|---|---|
| Wrong UN number or packing instruction | Classify by chemistry, configuration and Wh rating before packing |
| No UN38.3 test summary available | Get the summary or its link from the manufacturer before booking |
| SoC above 30% on UN 3480 or PI 966 batteries | Set SoC at the factory or warehouse and keep the record with the shipment file |
| Missing Cargo Aircraft Only label on PI 965 or 968 | Label every package and overpack |
| Section II package over 5 kg | Split the shipment or move it to Section I |
| Damaged batteries, or batteries defective for safety reasons | Keep them off the air waybill; they are forbidden by air |
| Batteries mixed with incompatible dangerous goods | Repack to respect the segregation rules |
| DGD signed by an untrained person | Use trained staff or a trained third party |
Interworld Freight is IATA accredited and has moved air cargo from Miami since 1992. We check classification, packaging and documents against the airline's acceptance requirements before tender, book carriers whose aircraft and acceptance rules fit your batteries, and route standalone batteries by ocean when no freighter serves the destination. We quote within one business day.
Yes, as Class 9 dangerous goods under the IATA Dangerous Goods Regulations. The shipment must be classified, packed, marked, labeled and documented to the correct packing instruction. Standalone batteries fly only on cargo aircraft.
Lithium ion batteries shipped alone (UN 3480) must travel at 30% of rated capacity or less. Since 1 January 2026, the same limit applies to lithium ion batteries packed with equipment under PI 966. Higher charge needs State approvals.
No. Lithium ion batteries shipped by themselves are forbidden on passenger aircraft and must carry a Cargo Aircraft Only label. Batteries packed with or contained in equipment can fly on passenger aircraft within package limits.
Yes. Manufacturers and distributors of cells, batteries and battery-powered equipment made after 30 June 2003 must make the test summary available. It can be shared by link or QR code instead of a paper copy.
A DGD is required for fully regulated shipments under Section IA, IB and Section I of the packing instructions. Section II shipments of small batteries in or with equipment do not need a DGD but still need correct packaging and marks.
Yes, within the rules and subject to the routing. Batteries in or with equipment can use passenger flights; standalone batteries need a freighter service, and some island lanes are better served by ocean freight.